Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

Your Compact Tractor in Drawings: Hitch Any Implement in 5 Steps, Same Order Every Time One Topic on Every Page

The controls, the three-point hitch, PTO safety, the front loader, slopes and rollovers, the rotary cutter, the box blade and the daily walk-around. Every topic has its own page: the drawing first, then what you need to remember. 65 illustrated pages.

GET COMPACT TRACTOR ILLUSTRATED

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEvery lever, hitch step and safety rule drawn, with the explanation beside it
65 illustrated pages8 parts, from the tractor map to the shed review
Up-to-date sourcesOSHA tractor rules, NIOSH safety material and ASABE hitch and PTO standards
PDF by emailFormat

Look Inside the Book

Every page has one big drawing and a box with the steps and numbers you need to know:

Sub-compact ~20-25 hp, compact ~25-60 hp, and the hitch pin sizes that match each class.
Sub-compact ~20-25 hp, compact ~25-60 hp, and the hitch pin sizes that match each class.
Two pedals: split in the field, latched for the road. Parking brake always before stepping off.
Two pedals: split in the field, latched for the road. Parking brake always before stepping off.
Bucket up = center of gravity up = easier side rollover. Travel low.
Bucket up = center of gravity up = easier side rollover. Travel low.
No riders on fenders, buckets or implements; nobody under a raised load.
No riders on fenders, buckets or implements; nobody under a raised load.
Cat 0, 1 and 2 by pin size: Category 1 is 3/4 in top, 7/8 in lower.
Cat 0, 1 and 2 by pin size: Category 1 is 3/4 in top, 7/8 in lower.
Quick hitch: matching bushings, every latch fully closed before you lift.
Quick hitch: matching bushings, every latch fully closed before you lift.
10-point walk-around: fluids, tires, leaks, hoses, shields, ROPS, belt, lights and SMV
10-point walk-around: fluids, tires, leaks, hoses, shields, ROPS, belt, lights and SMV
7 checks before you climb on: ROPS up, belt on, bucket low, guards on, all clear.
7 checks before you climb on: ROPS up, belt on, bucket low, guards on, all clear.

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 8 parts and 61 topics.

The Problem Isn't You. It's How It Was Explained.

You're on the slope behind the barn with the bucket half full, and the uphill wheel starts to feel light.

You read the rollover section last weekend. It's three pages of warnings about center of gravity and stability, and none of it shows you where the tipping point actually is.

Bucket up = center of gravity up = easier side rollover. Travel low.

In this book, side rollovers are one page: the tractor drawn on a slope, the center of gravity as a dot and the baseline it can't cross. Next to it, the number to keep: going from 3 to 6 mph quadruples the turning force.

Rear overturns, the three-point hitch, PTO engagement, loader capacity and the shutdown sequence work the same way: each one has its own page.

You look at the page once and you know what to do on that hill, without opening the manual on the tractor seat.

COMPARE FOR YOURSELF

Same Topic, Two Ways to Learn It

THIS
  • The manual: line after line of text
  • Position and draft explained only in words
  • You climb on the seat still guessing
The three-point hitch control lever regulates the hydraulic lift system through two distinct operating modes. In position control, the hitch is maintained at a height proportional to the lever setting, irrespective of variations in implement load. In draft control, where equipped, the system senses changes in draft force transmitted through the linkage and automatically raises or lowers the implement to maintain a consistent load. The rate of descent is regulated by the drop rate control valve, which should be adjusted according to implement weight.
FOR THIS
  • The three-point lever in one drawing
  • Position, draft and drop rate in a box
  • You see it and you get it
Two pedals: split in the field, latched for the road. Parking brake always before stepping off.
CONTENTS

Take a Look at the 8 Parts and 61 Topics

Meet your tractor, the controls, the safety rules, the three-point hitch and PTO, the front loader, implements, owner maintenance and a shed review: 65 pages, all illustrated.

IMeet Your Tractor · pp. 5-11
  1. Compact, Sub-Compact or Utility: What You Own
  2. The Tractor Map: Every Part With Its Name
  3. How Your Manual Is Organized (and Where the Numbers Hide)
  4. Hydrostatic vs. Gear Drive: Two Ways to Move
  5. High, Low and Range: Picking the Right Speed
  6. 4WD and Differential Lock: When to Use Each
  7. Tires, Ballast and Weight: Why the Back Must Be Heavy
IIThe Controls, Lever by Lever · pp. 12-19
  1. The Operator Station at a Glance
  2. The Dashboard: Lights and Gauges
  3. Safety Interlocks: Why It Won't Start
  4. Starting a Diesel the Right Way
  5. Throttle and Engine Speed: Why PTO Work Needs RPM
  6. Brakes and Parking Brake
  7. The Three-Point Lever: Position and Draft
  8. The Loader Joystick: Four Moves and Float
IIISafety Rules That Repeat on Every Job · pp. 20-27
  1. ROPS Up, Seat Belt On
  2. Side Rollovers: How a Slope Takes You
  3. Rear Overturns: The Hitch Point Rule
  4. Loader Low: Travel With the Bucket Down
  5. Slopes With a Load: Heavy End Uphill
  6. PTO Entanglement: Nine Turns a Second
  7. Shut Down Before You Step Off
  8. Bystanders, Kids and Riders
IVThree-Point Hitch and PTO · pp. 28-35
  1. Three-Point Hitch Categories
  2. Hitching an Implement: Lower Arms First
  3. The Top Link: Leveling Front to Back
  4. Lift Arm Leveling and Sway Control
  5. Quick Hitches: Faster, With Limits
  6. Rear PTO and Mid PTO
  7. Sizing a PTO Driveline
  8. Engaging the PTO Without a Jolt
VThe Front Loader · pp. 36-43
  1. Loader Capacity: Reading the Chart
  2. Mounting and Removing the Loader
  3. Filling the Bucket: Flat, Then Curl
  4. Dumping Into a Trailer or Pile
  5. Back-Blading and Grading With the Bucket
  6. Quick-Attach Plates and Bucket Swaps
  7. Pallet Forks and Grapples
  8. What a Loader Must Never Do
VIImplements, One by One · pp. 44-52
  1. Rotary Cutter: Setup and Height
  2. Rotary Cutter: Mowing Safely
  3. Shear Bolts vs. Slip Clutch
  4. Mid-Mount and Rear Finish Mowers
  5. Box Blade: Shanks, Depth and Pull
  6. Rear Grader Blade: Angle, Tilt and Offset
  7. Rotary Tiller: Depth and Speed
  8. Post Hole Digger
  9. Towing on the Drawbar: Trailers and Carts
VIIOwner Maintenance · pp. 53-60
  1. The Daily Walk-Around in 10 Points
  2. Grease Points: Where and How Often
  3. Fluids: Engine Oil, Hydraulic and Coolant
  4. Filters and the Air Intake
  5. Diesel Fuel, Water and Winter
  6. Hydraulic Leaks: Cardboard, Never Your Hand
  7. Battery and Electrical Basics
  8. Storing the Tractor for the Season
VIIIShed Review · pp. 61-65
  1. Before You Climb On: One-Page Checklist
  2. Public Roads: SMV Emblem and Lights
  3. Stuck, Tipped or Smoking: What to Do
  4. The Shutdown Sequence, Drawn One Last Time
  5. Most Common Compact Tractor Mistakes

One Page, One Topic, All Clear

Think of it this way:

It's Saturday morning and the rotary cutter is sitting behind the shed. You need it on the tractor before the grass gets any taller.

You open the hitching page and it's drawn in order: back up, left arm, right arm, lock pins, top link last. To unhitch, the same steps in reverse.

Cat 0, 1 and 2 by pin size: Category 1 is 3/4 in top, 7/8 in lower.

Same with the loader joystick, engaging the PTO, the box blade, the grease points and the daily walk-around: each one on its own page.

Compact Tractor Illustrated is 8 parts and 61 topics, all drawn, and it ends with a one-page checklist, the shutdown sequence and the most common mistakes, ready for the shed wall.

What you see drawn, you don't have to memorize.

What's Inside Compact Tractor Illustrated:

Ipp. 5-11

Meet Your Tractor

Compact, sub-compact or utility, the tractor map with every part named, how your manual is organized, hydrostatic vs. gear drive, ranges, 4WD and diff lock, and why the back must be heavy.

IIpp. 12-19

The Controls, Lever by Lever

The operator station, dashboard lights and gauges, safety interlocks, starting a diesel, throttle and PTO rpm, brakes, the three-point lever and the loader joystick with float.

IIIpp. 20-27

Safety Rules That Repeat on Every Job

ROPS up and belt on, side rollovers, the hitch point rule, bucket low, heavy end uphill, PTO entanglement, shutting down before you step off, and bystanders and riders.

IVpp. 28-35

Three-Point Hitch and PTO

Hitch categories, hitching lower arms first, leveling with the top link and lift arms, sway control, quick hitches, rear and mid PTO, driveline sizing and a smooth engagement.

Vpp. 36-43

The Front Loader

Reading the capacity chart, mounting and removing the loader, filling and dumping, back-blading, quick-attach plates, pallet forks and grapples, and what a loader must never do.

VIpp. 44-52

Implements, One by One

Rotary cutter setup and mowing, shear bolts vs. slip clutch, finish mowers, box blade, rear grader blade, rotary tiller, post hole digger and towing on the drawbar.

VIIpp. 53-60

Owner Maintenance

The 10-point daily walk-around, grease points, engine oil, hydraulic fluid and coolant, filters, diesel in winter, checking leaks with cardboard, the battery and seasonal storage.

VIIIpp. 61-65

Shed Review

A one-page pre-start checklist, the SMV emblem and lights on public roads, what to do when you're stuck or something smokes, the shutdown sequence and the most common mistakes.

At the end of the book: A one-page pre-start checklist, the shutdown sequence and the most common mistakes, ready to print for the shed.

SHOW ME WHAT'S INSIDE

Plus: 2 Free Books

What Would You Do? 40 Tractor Scenarios

BONUS 1: «What Would You Do? 40 Tractor Scenarios»

Value on its own: US$ 17.90

Real situations on your property (a side hill, a heavy bucket, a stuck implement), each with the safe answer drawn, so you practice the decision before you're on the seat.

Shed Cards: 15 Mistakes Before/After

BONUS 2: «Shed Cards: 15 Mistakes Before/After»

Value on its own: US$ 14.90

The most common compact tractor mistakes drawn wrong and right, on printable cards you can pin next to the tractor for a quick look before you start.

Compact Tractor Illustrated with 2 Free Books

  • Compact Tractor Illustrated: 65 illustrated pagesUS$ 63
  • BONUS 1: What Would You Do? 40 Tractor ScenariosUS$ 17.90
  • BONUS 2: Shed Cards: 15 Mistakes Before/AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT COMPACT TRACTOR ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Compact Tractor Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You just bought your first tractor

You just bought your first tractor

Every lever and gauge has its page and its name, so you know what each one does before you turn the key.

You have a job lined up this weekend

You have a job lined up this weekend

The hitching, PTO and implement pages walk you through the setup in the same order every time, so the mower or box blade goes on without a fight.

You've been running it for a while

You've been running it for a while

The slope, loader and maintenance pages fill the gaps you picked up from videos, and the printable checklists live in the shed next to the tractor.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT COMPACT TRACTOR ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Compact Tractor Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I didn't grow up on a farm and just bought my first tractor?

Yes. It starts with the tractor map and every lever by name, and it's written for adults who run their own property, not for kids. If you already use your tractor, the hitch, loader, slope and maintenance pages put what you know in order.

Where does the content come from?

From OSHA's rules for agricultural tractors (rollover protection, seat belts and PTO guarding), NIOSH and Penn State Extension tractor safety material, and ASABE standards for the three-point hitch, PTO and SMV emblem. Every manufacturer number is marked so you can check it in your own operator's manual.

Is this official material?

No. It's an independent illustrated guide that doesn't cover any one brand. It isn't affiliated with any agency or tractor manufacturer, and it works with any compact or sub-compact tractor.

Does it replace my operator's manual or hands-on training?

No. Your manual has your model's numbers; this book gives you the order and the picture. The manual says never hitch above the drawbar; here you see the tractor drawn flipping back, and why. Use both: your manufacturer's limits, your dealer's service and hands-on training always come first.

Will it work for my tractor? I have a specific brand and model.

Yes, if it's a compact or sub-compact tractor with a three-point hitch, whatever the brand: Kubota, John Deere, Mahindra, Kioti, New Holland or any other. The pages cover what every compact has in common: controls, hitch, PTO, loader and safety rules. Where a number depends on your model (loader capacity, fluid type, hitch category), the page shows where to find it in your operator's manual. No draft control on your tractor? The hitch pages show what to use instead.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, sent to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. There's no subscription.

Can I have it on paper?

Yes. It's a printable PDF: print the whole book or just the pages you need and keep them in the shed.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading the manual with nothing sticking.

Hitching the mower? You see it drawn and you're done.

You climb on the seat knowing where every lever is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT COMPACT TRACTOR ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.